SB 313-11_ Filed 01/28/2010, 10:56 Broden
that Senate Bill 313 be amended to read as follows:
SOURCE: Page 2, line 20; (10)MO031308.2. -->
Page 2, between lines 20 and 21, begin a new line block indented
" (4) For purposes of measuring electricity used and generated
by a net metering customer, and upon the request of a net
metering customer, require an electric utility to aggregate a
meter to which the net metering customer's generating facility
is physically attached and one (1) or more other meters,
subject to the following requirements:
(A) The additional meter is located on the property of the
net metering customer.
(B) The additional meter is used only to measure electricity
consumed by the net metering customer.
(C) The net metering customer must provide at least thirty
(30) days notice of a meter to be included in the
(i) identification of the meter; and
(ii) designation of the rank order of the meter for
purposes of determining billing credits.
(D) All charges applicable to a meter account, other than
(i) use kilowatt hours as the billing determinant; and
(ii) are subject to billing credits;
must be billed to the net metering customer.
(E) Provide for assignment of kilowatt hour billing credits
to additional meters in rank order.
(F) Provide that any remaining credit determined under
clause (E) reverts to the electric utility:
(i) on a rolling basis beginning in the billing cycle that
occurs twelve (12) months after the billing cycle in which
the net metering customer first generates excess kilowatt
hours measured on the applicable meter; and
(ii) when the net metering customer becomes ineligible or
otherwise stops participating in the electric utility's net
(G) Provide that a net metering customer that participates
in meter aggregation is not required to have all aggregated
meters on the same rate schedule.
(Reference is to SB 313 as printed January 26, 2010.)